The UniMove enclosed, pulley driven power units operate at >5,000 rpm. This speed on the hi-capacity compressors is nearly 50% greater than a direct drive Power Unit operating at 3450 rpm. The end result is far greater capability to compensate for air loss in highly porous loads.
All Power Units operate at approximately 74 – 75 dbA. To reduce this sound level, hi-temp exhaust hose can be clamped to Outlet/Exhaust pipe and directed away from the operating area.
Exhaust on Direct Drive Power Unit can be as shown, or positioned parallel to the Inlet pipe below the motor.
All Power Units are supported by 1.25″ rubber feet. If the Power Unit is in a washdown area, mount it above floor level on a shelf or platform.